- 您现在的位置：买卖IC网 > Sheet目录17358 > SJP7402-5/8-50-BLACK (3M)HOOK BLACK 5/8" X 50YD X 0.11"
3M ? Hook and Loop Reclosable Fasteners
SJP7401 Loop ? SJP7402 Hook ? SJA7501 Loop ? SJA7502 Hook
Design Considerations
? You will need to determine how much fastener will be needed to support your
application, however 4 square inches of 3M? Reclosable Fastener to support
1 pound of weight is our general suggestion.
? Rounding the corners of the fastener, slightly recessing the product into the
surface or providing raised edges around the Reclosable fastener can reduce the
possibility of edge lifting and improve the overall appearance of the fastener on
the finished product.
? These hook and loop Reclosable fasteners should be applied to surfaces that are
clean, dry and free of oil, grease, dust, mold release agents or surface
contaminants that could reduce the adhesion.
? To obtain an optimum bond to any surface, both the fasteners and the target
surfaces should have equilibrated for a minimum of 1 hour at temperatures
between 68°F (20°C) to 90°F (32.2°C) before application. The liner protecting
the adhesive is removed and preferably without touching the adhesive, the
fastener is applied to the surface to obtain initial contact between the adhesive
and substrate. Exposure of the adhesive to ambient conditions without the
protective liner, before applying to the surface, should be minimized as initial
adhesive tack may decrease. Flexible materials should be lying on a hard flat
surface so as to permit uniform adhesive contact with the surface. Use of a
rubber hand roller, press platen or similar device is recommended to ensure full
adhesive contact with the surface. Approximately 4.5 pounds of force per square
inch, (310 grams per square centimeter) is recommended to increase adhesive
contact, improving bond strength. For all adhesive applications, it is important
to ensure that the edges are rolled down to reduce the chance of edge lifting.
? It is essential that the user evaluate this product to determine whether it is fit for
a particular purpose and suitable for the user ’s method of application
-3-
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
GCM08DCAD
CONN EDGECARD 16POS R/A .156 SLD
TAAD226K050G
CAP TANT 22UF 50V 10% AXIAL
NCP1014STBUCGEVB
EVAL BOARD FOR NCP1014STBUCG
L-07C1N0SV6T
CER INDUCTOR 1NH 0402
LM2594APDBCKGEVB
EVAL BOARD FOR LM2594APDBCKG
EEM15DTBN
CONN EDGECARD 30POS R/A .156 SLD
SJP7401-5/8-50-BLACK
LOOP BLACK 5/8" X 50YD X 0.11"
EEM15DTBH
CONN EDGECARD 30POS R/A .156 SLD
相关代理商/技术参数
SJP7402-5/8-50-WHITE
功能描述:HOOK WHITE 5/8" X 50YD X 0.11" RoHS:是 类别:线缆，导线 - 管理 >> 扎带 系列:SJP7402 标准包装:1,000 系列:PAN-TY® 导线/缆线捆扎带类型:标准，锁定 线束直径:5.00"（127.00mm） 长度:1.46'（444.40mm） 宽:0.190"（4.80mm） 安装类型:自由悬挂 张力强度:50 磅（22.7 kg） 特点:- 材质:尼龙 包装:每包 1000 个 颜色:灰
SJP7402-5/8BK
功能描述:电缆束带 FASTENER HOOK BLACK 5/8 IN X 50 YD, 0.11
RoHS:否 制造商:Phoenix Contact 产品:Cable Tie Mounts 类型:Adhesive 颜色:Black 材料:Acrylonitrile Butadiene Styrene (ABS) 长度:19 mm 宽度:19 mm 抗拉强度:
SJP7402-5/8WH
功能描述:电缆束带 FASTENER HOOK WHITE 5/8 IN X 50 YD, 0.11
RoHS:否 制造商:Phoenix Contact 产品:Cable Tie Mounts 类型:Adhesive 颜色:Black 材料:Acrylonitrile Butadiene Styrene (ABS) 长度:19 mm 宽度:19 mm 抗拉强度:
SJPA-D3
制造商:SANKEN 制造商全称:Sanken electric 功能描述:Silicon Schottky Barrier Diode
SJPA-D3V
制造商:Sanken Electric Co Ltd 功能描述:DIODE SCHOTTKY 30V 1A SJP
SJPA-D3VR
制造商:Sanken Electric Co Ltd 功能描述:
SJ-PA-DMJ
制造商:DDK 制造商全称:DDK Ltd. 功能描述:Conversion Connector
SJ-PA-DMJ-1
制造商:DDK 制造商全称:DDK Ltd. 功能描述:Conversion Connector